- お電話でのお問い合わせ
- 072-228-4869

- 本社/工場
- 〒590-0906 大阪府堺市堺区三宝町3丁180番地

液体定量吐出バルブ バルペットBP-107DN-SP
○スポット噴霧が可能なスプレーバルブ
- ノズルが二重管構造に成っており先端にて液剤がエアー噴霧されます。
This model has adopted double nozzle structure, so you can spray the liquid.
- 先端が細いのでスポット的な噴霧が可能です。
Because the point of the nozzle is thin, it can be spraying a spot.
- シンプルな構造の為、メンテナンスが容易。
Maintenance is easy because of a simple structure.
- 弁開閉ストローク調整のしやすいマイクロメーター機構付モデルもあります。
There is a model with the micrometer that does the stroke adjustment easily.
- 弱スプリングの低粘度仕様に変更もできます。
There is a model for the low viscosity liquid that adopts weak spring.
最適使用液
Suitable liquid material |
オイル(Oil)など |
適応粘度Applicable viscosities |
低・中粘度(low・middle viscosity) |
制御空気圧Control air pressure |
0.4~0.5MPa(4~5kgf/cm²) 3ポート弁(3-port valve) |
材料圧送圧Material feed pressure |
MAX0.5MPa、MAX0.1MPa(DN-SP-T) |
重量Weight |
約140g |
最少吐出量Minimum dispensing volume |
0.001ml |
Kv値 |
0.2L/min.(内ノズル内径φ0.7mm取付時) |
用途Use |
自動車部品にオイルをスプレー塗布など。 |
copyright(C)2013 ACE-GIKEN co.,Ltd Allright Reserved.